View LA3336-T_522581.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Hyper 3 mm (T1) LED, Non Diffused Hyper-Bright LED LS 3336, LA 3336, LO 3336, LY 3336
Besondere Merkmale * Gehausetyp: nicht eingefarbtes, klares 3 mm (T1) Gehause * Besonderheit des Bauteils: Lotspiee mit Aufsetzebene * Wellenlange: 633 nm (super-rot), 615 nm (amber), 606 nm (orange), 587 nm (gelb) * Abstrahlwinkel: 50 * Technologie: InGaAlP * optischer Wirkungsgrad: 11 lm/W (gelb, orange, amber), 7 lm/W (super-rot) * Gruppierungsparameter: Lichtstarke * Lotmethode: Wellenloten (TTW) * Verpackung: Schuttgut, gegurtet lieferbar Anwendungen * Informationsanzeigen im Innen- und Auenbereich (z. B. im Verkehrsbereich) * optischer Indikator * Hinterleuchtung (LCD, Handy, Schalter, Tasten, Displays, Werbebeleuchtung, Allgemeinbeleuchtung) * Innenbeleuchtung im Automobilbereich (z.B. Instrumentenbeleuchtung, u.a.) * Ersatz von Kleinst-Gluhlampen * Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.a.) * Signal- und Symbolleuchten
Features * package: colorless, clear 3 mm (T1) package * feature of the device: solder leads with stand-off * wavelength: 633 nm (super-red), 615 nm (amber), 606 nm (orange), 587 nm (yellow) * viewing angle: 50 * technology: InGaAlP * optical efficiency: 11 lm/W (yellow, orange, amber), 7 lm/W (super-red) * grouping parameter: luminous intensity * soldering methods: TTW soldering * preconditioning: acc. to JEDEC Level 2 * packing: bulk, available taped on reel Applications * indoor and outdoor displays (e.g. displays for traffic) * optical indicators * backlighting (LCD, cellular phones, switches, keys, displays, illuminated advertising, general lighting) * interior automotive lighting. (e.g. dashboard backlighting, etc.) * substitution of micro incandescent lamps * marker lights (e.g. steps, exit ways, etc.) * signal and symbol luminaire
2002-03-14
1
LS 3336, LA 3336, LO 3336, LY 3336
Typ Type Emissionsfarbe Color of Emission Gehausefarbe Color of Package Lichtstarke Luminous Intensity IF = 20 mA IV (mcd) 71 ... 450 112 ... 180 180 ... 280 280 ... 450 112 ... 710 112 ... 710 180 ... 280 280 ... 450 450 ... 710 180 ...1120 112 ... 710 180 ... 280 280 ... 450 450 ... 710 180 ...1120 112 ... 710 180 ... 280 280 ... 450 450 ... 710 180 ...1120 Lichtstrom Luminous Flux IF = 20 mA V (mlm) 390 (typ.) 210 (typ.) 330 (typ.) 520 (typ.) 620 (typ.) 600 (typ.) 320 (typ.) 500 (typ.) 800 (typ.) 940 (typ.) 600 (typ.) 320 (typ.) 500 (typ.) 800 (typ.) 940 (typ.) 600 (typ.) 320 (typ.) 500 (typ.) 800 (typ.) 940 (typ.) Bestellnummer Ordering Code
LS 3336-QT LS 3336-R LS 3336-S LS 3336-T LS 3336-RU s s s s s LA 3336-RU LA 3336-S LA 3336-T LA 3336-U LA 3336-SV
super-red
colorless clear
Q62703-Q3482 Q62703-Q3484 Q62703-Q3485 Q62703-Q3813 Q62703-Q3486 Q62703-Q3554 Q62703-Q3551 Q62703-Q3552 Q62703-Q3553 Q62703-Q3555 Q62703-Q3144 Q62703-Q3176 Q62703-Q3170 Q62703-Q3307 Q62703-Q3177 Q62703-Q3487 Q62703-Q3489 Q62703-Q3490 Q62703-Q3814 Q62703-Q3491
amber
colorless clear
LO 3336-RU LO 3336-S LO 3336-T LO 3336-U LO 3336-SV LY 3336-RU LY 3336-S LY 3336-T LY 3336-U LY 3336-SV
orange
colorless clear
yellow
colorless clear
s Nicht fur Neuentwicklungen/ Not for new designs
Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11 % ermittelt. Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of 11 % Anm.: Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe oder mindestens zwei Einzelgruppen. In einer Verpackungseinheit / Gurt ist immer nur eine Helligkeitsgruppe enthalten. Die technologiebedingte Helligkeits-Streuung der heutigen LED-Herstellprozesse uber einen langeren Fertigungszeitraum (Halbleitermaterial - Chipherstellung - Montageprozess) erlaubt keine Zusage einer einzelnen Helligkeitsgruppe. Daher mussen mindestens zwei Helligkeitsgruppen vorgesehen werden!
Note: The standard shipping format for serial types includes a lower or upper family group or at least two individual
groups. No packing unit / tape ever contains more than one luminous intensity group. Luminosity variations caused by the technology used in current LED manufacturing processes over a protracted manufacturing period (semiconductor material - chip fabrication - assembly process) mean that it is not possible to assign LEDs to a single luminous intensity group. For this reason at least two luminous intensity groups must be provided!.
2002-03-14
2
LS 3336, LA 3336, LO 3336, LY 3336
Grenzwerte Maximum Ratings Bezeichnung Parameter Betriebstemperatur Operating temperature range Lagertemperatur Storage temperature range Sperrschichttemperatur Junction temperature Durchlassstrom Forward current Stostrom Surge current t 10 s, D = 0.005 Sperrspannung Reverse voltage Leistungsaufnahme Power consumption TA 25 C Symbol Symbol Werte Values LS, LO, LA LY - 55 ... + 100 - 55 ... + 100 + 100 30 1 0.2 Einheit Unit C C C mA A
Top Tstg Tj IF IFM
VR Ptot
3 80
V mW
Warmewiderstand 1) Thermal resistance Sperrschicht/Umgebung Rth JA Junction/ambient Rth JS Sperrschicht/Lotpad Junction/solder point Montage auf PC-Board FR 4 (Padgroe 16 mm 2) mounted on PC board FR 4 (pad size 16 mm 2) Minimale Beinchenlange Minimum lead length
1)
500 280
K/W K/W
Rth erhoht sich um 13 K/W pro mm Beinchenlange. Each additional 1 mm of lead length increases Rth by 13 K/W.
2002-03-14
3
LS 3336, LA 3336, LO 3336, LY 3336
Kennwerte (TA = 25 C) Characteristics Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 20 mA Dominantwellenlange Dominant wavelength IF = 20 mA Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 20 mA Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV Durchlassspannung 1) Forward voltage 1) IF = 20 mA Sperrstrom Reverse current VR = 3 V Temperaturkoeffizient von peak Temperature coefficient of peak IF = 20 mA; -10C T 100C Temperaturkoeffizient von dom Temperature coefficient of dom IF = 20 mA; -10C T 100C Temperaturkoeffizient von VF Temperature coefficient of VF IF = 20 mA; -10C T 100C Optischer Wirkungsgrad Optical efficiency IF = 20 mA
1)
Symbol Symbol LS (typ.)
Werte Values LA 622 LO 610 LY 591 645
Einheit Unit nm
peak dom
(typ.)
633
615
606
587
nm
(typ.)
16
16
16
15
nm
(typ.) (typ.) (max.) (typ.) (max.) (typ.)
2
50 2.0 2.4
50 2.0 2.4
50 2.0 2.4
50 2.0 2.4
Grad deg. V V
VF VF IR IR TCpeak
0.01 0.01 0.01 0.01 A A 10 10 10 10 0.14 0.13 0.13 0.13 nm/K
(typ.)
TCdom
0.01 0.06 0.07 0.10 nm/K
(typ.)
TCV
- 2.0 - 1.8 - 1.7 - 2.5 mV/K
(typ.)
opt
7
11
11
11
lm/W
Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. Voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V.
2002-03-14
4
LS 3336, LA 3336, LO 3336, LY 3336
Relative spektrale Emission Irel = f (), TA = 25 C, IF = 20 mA Relative Spectral Emission V() = spektrale Augenempfindlichkeit Standard eye response curve
100
OHL00235
Irel
% 80
V
60 yellow orange amber super-red
40
20
0 400
450
500
550
600
650
nm
700
Abstrahlcharakteristik Irel = f () Radiation Characteristic
40 30 20 10 0 1.0
OHL01646
50
0.8
0.6 60 0.4 70 0.2 80 90 100 1.0
2002-03-14
0
0.8
0.6
0.4
0
5
20
40
60
80
100
120
LS 3336, LA 3336, LO 3336, LY 3336
Durchlassstrom IF = f (VF) Forward Current TA = 25 C
10 2 mA 5
OHL00232
Relative Lichtstarke IV/IV(20 mA) = f (IF) Relative Luminous Intensity TA = 25 C
10 1
OHL00233
IV I V (20 mA)
10 0
IF
10 1 5
5
10 -1 5
10 0 5
10 -2 5
super-red yellow orange/amber
10 -1
1
1.4
1.8
2.2
2.6
3 V 3.4
10 -3 -1 10
5 10 0
5 10 1
mA 10 2
VF
Maximal zulassiger Durchlassstrom IF = f (T) Max. Permissible Forward Current
35
OHL01013
IF
Relative Lichtstarke IV/IV(25 C) = f (TA) Relative Luminous Intensity IF = 20 mA
IV 2.0 IV (25 C)
OHL00238
I F mA
30
TA
25 20 15 10
TS
1.6
1.2
orange yellow amber super-red
0.8 orange yellow amber super-red
0.4
5 0
TA temp. ambient TS temp. solder point
0 20 40 60 80 C 100
0 -20
0
20
40
60
C 100
T
2002-03-14 6
TA
LS 3336, LA 3336, LO 3336, LY 3336
Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C LS, LA, LO
100 A 5
OHL00318
Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C LY
100 A 5
OHL00316
IF
IF
D=
0.005 0.01 0.02 0.05 0.1 0.2 0.5
D = TP
t
tP
IF T D=
0.005 0.01 0.02 0.05 0.1 0.2 0.5
10-1 5
10-1 5
D= T
tP
tP
IF T
10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2
10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2
tp
tp
Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C LS, LA, LO
100 A 5
OHL01414
Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C LY
IF
100 A 5
OHL01415
IF
D = TP
t
tP
IF T
D= T
tP
tP
IF T
D=
10
-1
5
0.005 0.01 0.02 0.05 0.1 0.2 0.5
10-1 5
D=
0.005 0.01 0.02 0.05 0.1 0.2 0.5
10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2
10-2 -5 10 10-4 10-3 10-2 10-1 10 0 101 s 10 2
tp
2002-03-14 7
tp
LS 3336, LA 3336, LO 3336, LY 3336
Mazeichnung Package Outlines
Area not flat
0.4 (0.016) 0.7 (0.028)
0.4 (0.016) 0.8 (0.031)
0.6 (0.024)
0.4 (0.016)
4.8 (0.189) 4.4 (0.173)
3.4 (0.134) 3.1 (0.122)
2.54 (0.100) spacing
o2.9 (0.114)
o2.7 (0.106)
1.1 (0.043)
0.9 (0.035)
1.8 (0.071) 1.2 (0.047)
3.7 (0.146) 3.5 (0.138) 6.1 (0.240) 5.7 (0.224)
0.6 (0.024) 0.4 (0.016)
29.0 (1.142)
Cathode
27.0 (1.063)
GEXY6045
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
Kathodenkennung: kurzerer Lotspie Cathode mark: short solder lead Gewicht / Approx. weight: 0.15 g
2002-03-14
8
LS 3336, LA 3336, LO 3336, LY 3336
Lotbedingungen Soldering Conditions Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802)
300 C T 250 235 C ... 260 C
OHLY0598
10 s
Normalkurve standard curve 2. Welle 2. wave Grenzkurven limit curves
200 1. Welle 1. wave 150 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling ca 200 K/s 5 K/s 2 K/s
0 0 50 100 150 t 200 s 250
Empfohlenes Lotpaddesign Recommended Solder Pad
Wellenloten (TTW) TTW Soldering
4 (0.157)
OHLPY985
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch)
2002-03-14
4.8 (1.890)
9
LS 3336, LA 3336, LO 3336, LY 3336
Revision History: 2002-03-14 Previous Version: Page 3 4 2001-02-12 Subjects (major changes since last revision) thermal resistance (footnote) value (wavelength amber/yellow)
Published by OSRAM Opto Semiconductors GmbH & Co. OHG Wernerwerkstrasse 2, D-93049 Regensburg (c) All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.
2002-03-14
10

▲Up To Search▲

Price & Availability of LA3336-T

	To Download LA3336-T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .